Within the pharmaceutical industry, strict requirements on air purity levels are necessary because of the direct effect that airborne contamination has on the quality of the pharmaceutical products. Anything that could come into direct contact with a pharmaceutical product is a potential risk toward contamination.
Especially for aseptically prepared parenteral medicine (such as injectables and infusions), no contamination can be accepted, otherwise severe harm or life-threatening health risks to the patient can result.
Filter Elements
Housings and Equipment
Pocket Filters
Our pocket filters (DriPak SX, NX and GX) have the highest dust holding capacity, with optimised pressure drop behaviour for high performance.
Click here to learn more
Compact Filters
Our VariCel VXL and VariCel VXLE have higher dust holding capacity, which results in less filter changes. They have an extended service life, thus reducing replacement costs.
Click here to learn more
MEGAcel I
The only deep pleat box filter with separator and membrane technology that is testable with high concentration DEHS. Offers ultra low pressure drop at HEPA filtration efficiency levels. Used to remarkably increase IAQ or for applications requiring ultra clean air.
Click here to learn more
AstroHood II
Compact filter for the removal of airborne molecular contaminants (AMC) and for effective removal of typical gaseous contaminants that lead to unpleasant odors or corrosion
Click here to learn more
MEGAcel II
The only panel filter with membrane technology that is testable with high concentration DEHS. It offers ultra low pressure drop at HEPA filtration efficiency levels. Mainly used in ultra clean environments and applications such as cleanrooms. Suitable for PAO and DPC test methods.
Click here to learn more
HEATMOS
H14 HEPA filter according to EN1822 with low pressure drop for use in high temperature cleanroom applications (e.g. aseptic filling), requiring ultra clean air to protect sensitive processes and products.
Click here to learn more
Filter Elements
Housings and Equipment
Panel Filters
Our panel filters are ideal for protecting more expensive secondary air filters from premature dust loading and replacement. As primary filters, they also help reduce HVAC maintenance costs by preventing unnecessary dust build-up on coils, fans and duct work.
Click here to learn more
Compact Filters
Our VariCel VXL and VariCel VXLE have higher dust holding capacity, which results in less filter changes. They have an extended service life, thus reducing replacement costs.
Click here to learn more
MEGAcel I
The only deep pleat box filter with separator and membrane technology that is testable with high concentration DEHS. Offers ultra low pressure drop at HEPA filtration efficiency levels. Used to remarkably increase IAQ or for applications requiring ultra clean air.
Click here to learn more
AstroFan FFU
The AAF AstroFan FFU unit is a self-contained ceiling filter fan unit. The unit is lightweight and easy to install.
Click here to learn more
MEGAcel II
The only panel filter with membrane technology that is testable with high concentration DEHS. It offers ultra low pressure drop at HEPA filtration efficiency levels. Mainly used in ultra clean environments and applications such as cleanrooms. Suitable for PAO and DPC test methods.
Click here to learn more
AstroSafe RPT Housing
Fully welded safe change housing with bag in/bag out provision for the installation of HEPA filters in air supply, recirculating or exhaust
ducting in applications requiring a certain biosafety level.
Click here to learn more
Control of viable and non-viable particles is crucial in many process applications in the pharmaceutical industry. Protection of people from hazardous or potent compounds is equally important. AAF offers a wide variety of supply, exhaust and recirculated air housings and filter types to address each application.
No clean air is possible without a carefully selected and reliably functioning air filtration system. The performance of installed air filters, whether highly efficient HEPA filters or prefilters, directly determines how effectively harmful contaminants are prevented from entering the airstream in process environments.
However, if the air filter selection process does not also consider the lifetime operating costs of a given product, facilities could be exposed to unnecessary risks and expenses.
We have several kinds of housings in our portfolio, like air supply systems, ducted housings, biosafety housings, terminal housings and fan filter units.
Learn More
Air Filters Ltd (AAF International)
Bassington Lane, Cramlington
Northumberland NE23 8AF
United Kingdom
+44 1670 339 190
airfilter@aafeurope.com
© 2020 American Air Filter Company, Inc. This web site is property of American Air Filter Company, Inc.
Any use of the text or images it contains, without permission of American Air Filter Company, Inc., is prohibited
Corporate European
Denmark
Finland
France
Germany & Switzerland
Greece
Italy
Latvia
Netherlands
Norway
Slovakia
Spain & Portugal
Sweden
UK & Ireland
Austria
Poland
Hongary
Czech Republic
Macedonia